Продукти за хартия fsc (13)

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

EUROCOAT of COSMOCHROME is a high quality rust primer produced with excellent european materials. It is an ideal primer undercoat for the protection of all metallic surfaces from rust.It is suitable for interior and exterior use. It can be applicated with brush or spray gun. Thinning 10% with white spirit or turpentine for use with brush and 20% for use with spray gun. PACKAGE:0,375 LT, 0,75 LT, 10 LT, 2,5 LT, 20 LT COLOR:Black, Cypress Green

Resistant & cut-proof

FIX is a gypsum-based adhesive that is used for direct fixing of all types of plasterboards on walls made of concrete, aerated concrete, bricks, etc., in premises with normal humidity. Application: • Drywall linings without supporting structure • Shaping of window and door openings • Filling of cavities greater than 3 mm • Application in premises with normal humidity Advantages: • High strength • Fast gathering of strength • Excellent traction with the base • Easy and effective work TECHNICAL INFORMATION: In compliance with EN 14496:2017 : Type 3B • Paper bag: 25 kg • Mixing Ratio: ~ 13 l water : 25 kg • Coverage: ~ 5 m²/ 25 kg • Consumption: ~ 5 kg/m² • Bond strength: 0.23 MPa • Bags per pallet: 40 pcs • Pallet weight: 1000kg Sizes (kg):25

F-Exx 3.0 F - Der Fettbrandlöscher bei Fettbränden bis zu 25 Litern

PX 08 jest jednoskładnikowym, bezbarwnym, szybko wysychającym podkładem poliuretanowym do gruntowania niechłonnych podłoży przed nałożeniem powłok antygraffiti w celu zwiększenia ich przyczepności do podłoża. Po wyschnięciu tworzy elastyczny i przejrzysty film izolujący, który jest mało widoczny lub całkowicie niezauważalny w zależności od rodzaju podłoża, nasłonecznienia i kąta padania światła. Preparat posiada doskonałe właściwości adhezyjne. PX 08 służy do stosowania na powierzchniach niechłonnych typu farby proszkowe, laminaty poliestrowe oraz do większości tworzyw sztucznych i innych trudno przyczepnych podłoży. Preparat może być również stosowany pod aplikację innych powłok malarskich. 

SPN continues to expend its range of products to better meet your needs. Since 2016, SPN proposes semi-finished in shapes of rods from diameter 5 to diameter 20. These rods can be delivered in length of 1, 2 or 3 meters depending of your request.

YÜKSEK ESNEK KABİLİYETİ VE ALT YÜZEYE MÜKEMMEL YAPIŞMA PERFORMANSI GİBİ ÖZELLİKLER MEVCUTTUR

Das von Biosepar völlig neu entwickeltes formalinfreies Fixiermedium hat viele Vorteile gegenüber den formalinhaltigen früheren konventionellen Fixiermittel. Diese sind u.a.: Allgemein bessere Färbeeigenschaften von Gewebe und Zellen, die die diagnostische Qualität und Sicheheit enorm erhöhen, keine Gewebeschrumpfungen durch Denaturierungen, keine störende färberische Artefacte, intakte immunologische Sensitivität von Antikörper und Antigen, Vermeindung der irreversiblen Vernetzung von DNS und RNS und fehlende Giftigkeit, wodurch keine Entsorgungsprobleme bestehen. Das FixSepar® ECO PLUS Histology (FEPH®) bietet für alle Human- und Veterinärmediziner, Biologen, Immunologen und Molekularbiologen zukünftig bessere Ergebnisse und günstigere, ungefährliche Arbeitsbedingungen.

AFR-EXA05 LD x CD x L x e:E50 x 23 x 8 x 1,5, E50 x 23 x 8 x 2 ACIER kg/m²:8,2, 10,95 ALUMINIUM kg/m²:2,85, 3,75 Formats maxi Panneaux mm:LD1000/1250/1500, CD > 3000 Epaisseur apparente (interne) mm:10 Vide frontal % Vide maxi:43 env.

Acrylic copolymer is an emulsion-based, silicone-folded, textured, thick-grained exterior wall coating material. It adheres very well to surfaces, does not crack and flake, and does not fade. It ensures that the moisture on the wall is expelled with its ability to breathe with its waterproof properties.

FCP

Adaptés aux hautes températures, le PTFE - Polytétrafluoroéthène - aussi connu sous le nom de Téflon. Il possède une bonne résistance aux produits chimiques et un faible coefficient de frottement. le PTFE est donc utilisé dans l'industrie pour des joints d'étanchéité, des membranes ou des isolations électriques. SPN pourra vous fournir des bandes traitées collables ou des pièces et semi-produits en PTFE chargés carbone, graphite, nickel, chrome, fibre de verre et autres compounds spécifiques.